Rosewill RC208 Instrukcja Użytkownika Pobierz pdf (Strona 12)

RC200 FAQ

15. Question:

What to do when your computer does not start up normally after installing the RC-200 RAID card?

Answer:

Option#1: Make sure you have installed the driver correctly.

1. Insert the RC-200 RAID card into your system but connect your hard disk to the main board IDE

connector.

2. Boot up system and install the RC-200 driver.

3. Reboot system and check your Device Manager to make sure the driver is installed properly.

4. If there is not problem then shutdown your system and connect your hard disk to the RC-200 RAID

controller.

5. Restart system.

Option#2: It is recommended to connect two identical hard drives to the card. Avoid connecting other

IDE devices to it if RAID function is activated.

Option#3: Update your system BIOS to make sure it support RAID set. The enclosed Medley software to

monitor the RAID set.

Option#4: Remove the card and its driver from Device Manager. Reinstall the card with different PCI

slot.

Option#5: Update your Windows to the latest service pack.

16. Question:

What is the minimum system requirement?

Answer:

To fully utilize the function of RC-200 RAID controller card, your system must meet the following

requirements:

1. Intel Pentium based PC or compatible

2. Minimum 128MB memory

3. Support Plug-n-Play features

4. Support PCI 5V interface

5. Windows 98SE, Windows ME, Windows 2000, or Windows XP OS

1 2 ... 7 8 9 10 11 12 13

Brak uwag

Rosewill RC208 Instrukcja Użytkownika Strona 12