Rosewill Computer Case 422 Informacje Techniczne Pobierz pdf (Strona 90)

173

Exercises

Disassembly

and Power

Lab 4.5 Pin-Out Diagramming

Objective: To draw a pin-out diagram using a working cable

Parts: Multimeter

Good cable

Procedure: Complete the following procedure and perform the accompanying activities.

1. Obtain a meter and a good cable from your instructor.

2. Set the meter to ohms.

Instructor initials: _____________

3. Power on the meter.

4. Lay the cable horizontally in front of you. The connector on the left is referred to as

Connector A. The connector on the right is referred to as Connector B.

5. Touch one meter lead to Connector A’s pin 1. Touch the other meter lead to every

Connector B pin. Notice when the meter shows zero resistance, indicating a connection.

Using the table that follows, draw a line from Connector A’s pin 1 to any Connector B pins

that show zero resistance. Add more pin numbers as needed to the table or use a separate

piece of paper. Remember that all pins do not have to be used in the connector. There are

no review questions; however, there is a connector table that contains connection lines.

The lines will be cable dependent.

Connector A Connector B

❐ 1 ❐ 1

❐ 2 ❐ 2

❐ 3 ❐ 3

❐ 4 ❐ 4

❐ 5 ❐ 5

❐ 6 ❐ 6

❐ 7 ❐ 7

❐ 8 ❐ 8

❐ 9 ❐ 9

❐ 10 ❐ 10

❐ 11 ❐ 11

❐ 12 ❐ 12

❐ 13 ❐ 13

❐ 14 ❐ 14

❐ 15 ❐ 15

❐ 16 ❐ 16

❐ 17 ❐ 17

❐ 18 ❐ 18

❐ 19 ❐ 19

❐ 20 ❐ 20

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 149 150

Brak uwag

Rosewill Computer Case 422 Informacje Techniczne Strona 90